Back to Blog
How-to Guides 2026-11-15 GUNNER 0 views

How to Secure a GUNNER Kennel in a Truck Bed with Strap Kits

How to Secure a GUNNER Kennel in a Truck Bed with Strap Kits

Learn how to anchor your GUNNER dog crate in a truck bed using the Tie-Down Strap Kit, choose the right strap length, and follow a safe, repeatable setup.

Why a dedicated tie-down kit matters

When you transport your dog in a crate in a truck bed, the crate must be anchored so it doesn’t shift or tip. GUNNER tie-down straps are used to securely anchor your dog crate to your vehicle and are the only ones that we recommend for 5 Star Crash Test certified safety. That’s the core reason to use the GUNNER Tie-Down Strap Kit rather than a generic strap from the hardware store.

The kit is built for the job: an extra-thick custom cambuckle adds break strength, and the synthetic material is designed so you can leave the straps out 24/7. Two strap length options let you match your truck bed and crate setup.

What the Tie-Down Strap Kit gives you

  • TIE-DOWN STRAP KIT: GUNNER tie-down straps are used to securely anchor your dog crate to your vehicle and are the only ones that we recommend for 5 Star Crash Test certified safety. This is the primary reason to choose this kit: it’s the strap GUNNER recommends for crash-tested safety.
    TIE-DOWN STRAP KIT
    TIE-DOWN STRAP KIT
  • TIE-DOWN STRAP KIT: Made with an extra-thick custom cambuckle for additional break strength and a synthetic material to ensure you can leave these out 24/7. The cambuckle and weather-resistant material mean the straps can stay installed and ready for repeated use.
  • TIE-DOWN STRAP KIT: Now offered in two strap length options to accommodate a greater variety of setups. You’ll need to pick Traditional or Combination based on your truck bed and crate size.

Choose the right strap length for your setup

The Tie-Down Strap Kit comes in two lengths: Traditional and Combination. The catalog does not list specific measurements for either, so you’ll need to judge based on your truck bed and crate placement. As a practical starting point, measure the distance from your crate’s tie-down points to the anchor points in your truck bed, then add a little slack for the cambuckle to operate. If you’re unsure, the Combination length is designed to accommodate a greater variety of setups, but confirm with GUNNER if you’re between sizes.

How to install the tie-down straps

The supplied product record does not include step-by-step instructions, so the following is a general sequence based on the kit’s intended use. Always follow any instructions that come with your kit and your vehicle’s owner’s manual.

  1. Position the crate: Place the GUNNER kennel in the truck bed where it will ride. Make sure it sits flat and doesn’t block lights or hitches.
  2. Identify anchor points: Locate the crate’s tie-down points and the truck bed’s anchor points. The kit’s cambuckle and strap are designed to connect these securely.
  3. Route the straps: Run each strap from the crate to the anchor point without sharp bends or contact with hot or moving parts. Leave enough tail to thread the cambuckle.
  4. Tension the cambuckle: Thread the strap through the cambuckle and pull to tighten. The extra-thick cambuckle is designed for additional break strength, so apply firm tension without over-cranking.
  5. Check for security: Push and pull the crate by hand to confirm it doesn’t shift. Re-tension if needed. The goal is a snug, stable hold—not a crushed crate.

Color choices: Blaze Orange, Mossy Oak Bottomland, or Black

The Tie-Down Strap Kit comes in three colors: Blaze Orange, Mossy Oak Bottomland, and Black. Color doesn’t affect performance, so pick what suits your truck and gear. Blaze Orange adds visibility, Mossy Oak Bottomland blends with camo patterns, and Black is a neutral, low-profile option.

  • Blaze Orange: High-visibility option that’s easy to spot in a busy truck bed.
  • Mossy Oak Bottomland: Camo pattern that coordinates with other GUNNER gear.
  • Black: Understated and matches most truck bed liners.

Transport safety reminders

Securing the crate is only one part of safe transport. Always confirm the crate is properly assembled and the door is latched before driving. After you’ve driven a short distance, stop and re-check strap tension—straps can settle. Because the synthetic material is designed to be left out 24/7, you can keep the straps installed between trips, but inspect them for wear before each use.

The supplied information does not specify a maximum load rating or detailed inspection schedule for the straps beyond the material’s outdoor suitability. For heavy-duty or long-distance towing, consult GUNNER directly if you have questions about your specific setup.

Related Articles

Customer Service
Home
Products
Cart
Profile