What the Connection Strap Kit is designed to do
The GUNNER Connection Strap Kit is a dedicated accessory for joining multiple kennels together. It is not a standalone tie-down system; it is made to be used in conjunction with the 8' Tie-Down Strap Kit. If your goal is to keep two or more kennels from shifting apart in a truck bed, trailer, or yard setup, this kit provides the link between them.
Because the kit is built from the same materials as the crash-tested tie-downs, it is intended for long-term outdoor exposure. The extra-thick custom cam buckle and synthetic strap material are designed to resist fading and stretching, so you can leave the connection in place 24/7 without routinely removing it.
Key specifications at a glance
- CONNECTION STRAP KIT: Designed specifically to secure multiple kennels to one another. This is the kit's primary job; it is not a general-purpose strap.

CONNECTION STRAP KIT - CONNECTION STRAP KIT: Made to be used in conjunction with the 8' Tie-Down Strap Kit. You need the tie-down kit to anchor the kennels; the Connection Kit links them together.
- CONNECTION STRAP KIT: Extra-thick custom cam buckle and synthetic material resist fading and stretching for 24/7 outdoor use. Suitable for leaving installed outdoors long-term without frequent removal.
How to attach the Connection Strap Kit to your kennels
The supplied information does not include step-by-step installation instructions. The following sequence is a logical approach based on the kit's stated purpose and should be adapted to your specific kennel setup.
- Position the kennels: Place the kennels side by side or in the configuration you want, leaving enough space to work the straps between them.
- Route the connection strap: Pass the strap through or around a secure point on each kennel so the cam buckle sits where you can reach it for tensioning.
- Thread and tension the cam buckle: Feed the strap tail through the cam buckle and pull to remove slack. The cam buckle is designed to hold tension without stretching.
- Anchor with the Tie-Down Strap Kit: Use the 8' Tie-Down Strap Kit to secure the connected kennels to your vehicle or ground anchors. The Connection Kit alone does not anchor to a fixed point.
- Check for movement: Gently push each kennel to confirm the connection limits side-to-side or front-to-back shifting. Retension if needed.
Choosing a color for your setup
The Connection Strap Kit comes in three strap colors: Mossy Oak Bottomland, Blaze Orange, and Black. Color does not affect performance, but it can help you match existing gear or spot the strap quickly. Blaze Orange offers high visibility, which may be useful in busy yards or when loading in low light. Mossy Oak Bottomland blends with natural surroundings, while Black is a neutral choice that hides dirt well.
What the supplied information does not cover
The catalog does not specify a maximum number of kennels that can be linked with one kit, nor does it provide a weight limit or detailed installation diagrams. It also does not state whether the cam buckle is lockable or how to clean the strap. For these details, consult the product packaging or contact GUNNER support directly. Always follow the instructions included with your Tie-Down Strap Kit for anchoring your kennels safely.

