Start by confirming your kennel and plug
The Drain Plug 2.0 is a replacement or spare plug for the G1 GUNNER kennel. It fits Small, Medium, Intermediate, and Large kennel sizes, so the same plug works across the range. If your kennel is a G1 and you need a plug or want the easier 2.0 design, this is the part to check.
Before you buy or install, look at the drain opening on your kennel and confirm you have a G1 model. The supplied information covers G1 kennels only; it does not confirm fit for other kennel lines or third-party crates.
What the Drain Plug 2.0 is
- DRAIN PLUG 2.0: New and improved drain plug for the G1 GUNNER kennel. Confirms this is the current plug design for the G1 kennel rather than a generic stopper.

DRAIN PLUG 2.0 - DRAIN PLUG 2.0: Fits Small, Medium, Intermediate and Large size kennels. One plug part covers the full G1 size range, so you don't need to match a size code.
- DRAIN PLUG 2.0: 2.0 design makes the plug easier to take on and off. The practical benefit is simpler removal and reinstallation when you drain or clean the kennel.
- DRAIN PLUG 2.0: (1) drain plug comes with each G1 kennel. Explains why you may already have one and when a spare or replacement makes sense.
When the plug earns its place
Use the plug when you want the kennel floor to hold water or rinse solution during cleaning, or when you want to keep water and debris from passing through the drain opening during normal use. Remove it when you want the kennel to drain.
The supplied information does not specify cleaning products, water temperature, soak times, or how often to remove the plug. Treat those as your own routine decisions and follow any guidance that came with your kennel.
How to fit and remove the Drain Plug 2.0
The 2.0 design is described as easier to take on and off. The exact removal and installation method is not detailed in the supplied information, so use the fit that matches your kennel's drain opening and avoid forcing the plug.
- Check the drain opening: Confirm the opening is clear of hair, dirt, or dried debris before fitting the plug.
- Seat the plug: Press the plug into the drain opening until it sits flush. The supplied information does not describe a specific tool or twisting motion.
- Test the seal: Add a small amount of water and watch the drain area. If water passes, reseat the plug and check for debris in the opening.
- Remove for drainage: Pull the plug out when you want the kennel to drain. The 2.0 design is intended to make this easier than the earlier version.
- Rinse and refit: Clean the plug and opening, then reseat. The supplied information does not confirm dishwasher use or specific cleaning agents.
Drain plug replacement: when to swap it
Each G1 kennel comes with one drain plug, so a replacement is mainly about having a spare or replacing a lost or worn plug. If your plug no longer stays seated, check the opening for debris first. If the plug itself is damaged, the Drain Plug 2.0 is the supplied replacement option.
Because the 2.0 design is described as easier to take on and off, it may suit owners who remove the plug often for cleaning or drainage. The supplied information does not include a lifespan or replacement interval.
What the supplied information does not confirm
The catalog does not list a material, a seal type, or a maximum water depth for the Drain Plug 2.0. It also does not confirm compatibility with non-G1 kennels or third-party crates. If your kennel is not a G1 GUNNER kennel, verify fit before relying on this plug.
For cleaning routines, the supplied information does not specify products, temperatures, or soak times. Use your own judgment and any care guidance that came with your kennel.

